Can I use Violetta without the Lithium Ion Cell plugged in?

A "battery bypass Plug" is available - note this is only for the Violetta Delay. This will allow you to remove the Li battery and run the pedal from an external DC supply - with the Li battery not plugged in.

 

How long will the battery last?

12 hours from a full 4 hour charge. The full charge requires the full 4 hour charging without a jack into the input socket.

 

My Violetta battery status is flashing what do I do?

This indicates a battery fault. Try disconnecting the external power supply and reconnecting. If the light still continues to flash please replace the battery. If you are unable to source a battery from your local RW dealer, please contact us at sale@redwitchanalogpedals.com

 

What are the voltage, current requirements and polarity requirements for the Violetta Delay?

The Violetta requires 9 volts DV, 110ma from a regulated DC supply with a 2.1mm plug, tip (center) negative.

 

How do I replace the battery in my Violetta Delay?

Simply unscrew the 4 screws in the baseplate. Locate the battery clip. Unclip. Clip in the new battery. Replace 4 screws. Proceed with initial 12 hour charge.

 

What are the physical dimensions of the Violetta Delay and how much does it weigh?

90mmx 30mm x 45mm.  157 grams.

 

What is the shortest delay time?

Approximately 25 m/secs

 

What is the longest delay time?

Approximately 1000m/secs

 

Can this pedal be set completely wet and completely dry?

You can do completely dry but not completely wet.

 

Can my Violetta Delay run through my amps effects loop or should I run it into the front end of the amplifier?

The pedal can be run through your effect loop with the loop pad engaged. However, they were designed to be run in the front end of an amp - like all classic effects :)

 

Do you do one off custom builds?

No not at this stage.

 

Can I use a bass through my Violetta Delay pedal?

Certainly!

 

Can I use a higher voltage to run my Violetta Delay pedal for increased headroom?

No. Under no circumstances try running the pedals on any voltage above 9 volts DC. Doing so will damage the pedal.

 

Do you offer modifications (mods)?

No.

 

How do I get the extended warranty for my pedal I have just purchased?

Please go to the Warranty and Registration Page on the website.

 

None of the questions relate to my problem or question - how do I contact you?

Go to our Contact page.